home *** CD-ROM | disk | FTP | other *** search
- >Fervour ReadMe
-
-
- The full version has 100 levels and a superb WIMP level designer. It is
- available direct from Clares Micro Supplies.
-
- Price £19.95 inc VAT and carriage.
-
-
- Clares Micro Supplies.
- 98 Middlewich Road,
- Rudheath,
- Northwich,
- CHESHIRE,
- CW9 7DA.
-
- Tel: 0606 48511
- Fax: 0606 48512
- EMail: sales@clares.demon.co.uk
-
- * Fervour will not work on the Risc PC *
-
- Instructions
- ¤¤¤¤¤¤¤¤¤¤¤¤
- Control the droid along the multicoloured band of
- energy. The different colours have the following effects:
-
-
- Cyan
- ¤¤¤¤
- This will increase the number of bounce credits you have. These are needed
- if you want to cause the droid to jump.
-
-
- Magenta
- ¤¤¤¤¤¤¤
- This reverses your controls and the effects of red, green blue and yellow
- areas.
-
-
-
- Light Pink
- ¤¤¤¤¤¤¤¤¤¤
- This increases the number of droids you have left
-
-
-
-
- Mauve
- ¤¤¤¤¤
- This increases the time you have left to complete the level in.
-
-
-
- Pastel Green
- ¤¤¤¤¤¤¤¤¤¤¤¤
- This is simply a score bonus.
-
-
-
-
-
- Brown
- ¤¤¤¤¤
- This will stop you in your tracks. Note it does NOT stop left and right
- movement.
-
-
-
- Purple
- ¤¤¤¤¤¤
- This will set your speed to a specific value which changes each level.
-
-
-
- Beige
- ¤¤¤¤¤
- This area has no friction thus you cannot control your droid's direction. If
- you get stuck you will need to jump.
-
-
- White
- ¤¤¤¤¤
- This will cause your droid to bounce. Note: this does NOT use a bounce
- credit.
-
-
-
- Yellow
- ¤¤¤¤¤¤
- This will move you right, but if you have reversed controls it will move you
- left.
-
-
-
- Blue
- ¤¤¤¤
- This will move you left, but if you have reversed controls it will move you
- right.
-
-
-
- Green
- ¤¤¤¤¤
- This will slow you down. Don't stop on here unless you have a bounce credit,
- you have been warned!
-
-
- Red
- ¤¤¤
- This will speed you up. Keep the decelerate key down to stay at the same
- speed.
-
-
-
- Grey
- ¤¤¤¤
- This does absolutely nothing!
-
-
-
-
- Controls
- ¤¤¤¤¤¤¤¤
-
- Keyboard
- ¤¤¤¤¤¤¤¤
- When selected the keyboard will be used to control the droid. You may
- define the keys you wish to use in the keys section of the window.
-
- Mouse
- ¤¤¤¤¤
- When selected the mouse will be used for left and right movement. If you
- also want to use the mouse buttons you must define the speed up, slow down
- and bounce keys as the mouse buttons. The zero speed is the speed with which
- the mouse will be centred. If zero, moving the mouse right a bit will cause
- the droid to move right until you move the mouse back to the central point.
- If the zero speed is non zero then, if you stop moving the mouse, the ball
- will eventually stop moving. (The larger the value the quicker the droid
- stops.)
-
- Joystick
- ¤¤¤¤¤¤¤¤
- This will use the joystick in joystick port 1. The software is compatible
- with any joystick interface that emulates the Acorn interface. You will need
- to load the joystick module supplied with your joystick interface if you are
- not using an Acorn interface.
-
- RTFM interface owners may simply click on the application !RTFMJoy. Owners
- of the Serial Port / Vertical Twist / Leading Edge interface must load their
- module from the support disc that came with the interface. Double click on
- !SerialJoy for more information.
-
-
- There are a number of utilities supplied on the disc. !MaxMem will only
- need to be run if you have a 1 megabyte computer - it maximises the memory.
- !MonType enables you to switch between mode types of 50KHz and 100KHz. The
- application explains its use when you double click on it.
-
- And that's all there is to it!
-
- Good
- Luck
- ....
-
-
-
-
-
-
-
-
-
-
-